Expansion of Lot P and the construction of a stormwater best management practice (BMP) within Lot S within the Main Campus

by 06/24/2015

ADVERTISEMENT FOR BIDS

Sealed proposals will be received by Wake Technical Community College in Raleigh, NC, in Conference Room 345, Montague Hall, Wake Technical Community College, Main Campus, 9101 Fayetteville Road, Raleigh, NC 27603, up to 3:00 p.m. on Tuesday, July 21, 2015 and immediately thereafter publicly opened and read for the furnishing of labor, material, and equipment entering into the construction of the expansion of Lot P and the construction of a stormwater best management practice (BMP) within Lot S within the Main Campus;

Bids will be received for a single prime contract only.  All proposals shall be lump sum.

A pre-bid meeting will be held for all interested bidders at 3:00 p.m. on Tuesday, July 7, 2015 in Conference Room 345, Montague Hall, Wake Technical Community College, Main Campus, 9101 Fayetteville Road, Raleigh, NC 27603. The meeting will address project specific questions, issues, bidding procedures, and bid forms.

Complete plans, specifications and contract documents will be open for inspection in the offices of The John R. McAdams Company, Inc. and in the plan rooms listed below:

The John R. McAdams Company
2905 Meridian Parkway,
Durham, NC  27713
(919) 361-5000
(919) 361-5922 fax

Dodge Data & Analytics
(formerly McGraw Hill Dodge Corporation)
http://dodgeprojects.construction.com/
(877) 903-1909

NCIMED Plan & Resource Center
114 W. Parrish Street, 5th Floor
Durham, NC  27701
(919) 956-8889

Associated General Contractors,
Carolinas Branch
(through partnership with iSqFt)
http://www.isqft.com/
(800) 364-2059

CMD Group
(formerly Reed Construction Data)
http://www.cmdgroup.com/
30 Technology Parkway South,
Suite 100
Norcross, GA  30092
(800) 424-3996

Hispanic Contractors Association of the Carolinas
(HCAC) in Winston-Salem,
Charlotte and Raleigh Areas
(through partnership with iSqFt)
http://www.isqft.com/
(877) 227-1680

Complete plans and specifications for this project may be obtained from The John R. McAdams Company, Inc., 919-361-5000, beginning on Tuesday, June 30, 2015 for a deposit of $250.00 in cash or certified check. Checks shall be made payable to The John R. McAdams Company, Inc.  The plan deposit will be refunded to all bidders and non-bidders, provided the plans are returned bound, in order, and in good condition no later than 10 (ten) days following the bid date.

Wake Technical Community College reserves the unqualified right to reject any and all proposals.

Signed: Wendell B. Goodwin, PE Facilities Engineering Officer Wake Technical Community College

Print Friendly, PDF & Email